DM1W4-6D50F - Zippy Technologies DM1W4-6D50F DC N + 1 Redundant Power Supply....
- Part Number:
- DM1W4-6D50F
- Model Number:
- DM1W4-6D50F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DM1W4-6D50F DC N + 1 Redundant Power Supply. Form Factor: Direct Current Component Plus One Independent Backup Redundant ( DC N+1 Redundant) | Wattage: 1350W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- As Logic Level Is High, Outputs Voltage Were Disable
- As Logic Level Is Low, Outputs Voltage Were Enable
- Cooling: Two 38 X 38 X 28mm Dc Fans
- Dc Inlet In Each Module
- Dielectric Withstanding: Input/Output 1500 Vac For 1 Minute
- Dimensions (DxWxH): 13.39"/340mm x 16.61"/422mm x 1.69"/43mm
- Efficiency: 68% Typical, At Full Load
- Emi: Meet Fcc Class A, Cispr 22 Class A
- Form Factor: Direct Current Component Plus One Independent Backup Redundant ( DC N+1 Redundant)
- Hold Up Time: 1.6 Ms Minimum At Full Load & -48vdc Input Voltage
- Input To Fram Ground 1500 Vac For 1 Minute
- Input: DC -48V
- Over Current Protection: +5v, +12v, +3.3v
- Over Load Protection: 110 ~ 160% Max
- Over Voltage Protection:+5v - 5.7v ~ 6.5v, +3.3v - 3.9v ~ 4.7v, +12v - 13.3v ~ 14.3v
- Power Good Signal: On Delay 100 Ms To 500 Ms, Off Delay 1 Ms
- Remote On / Off Control
- Safety: Meet Ul 60950, Csa 60950, Tuv En-60950
- Temperature Range: Operating 0C --- 40C, Storage –20C --- 70C
- The Power Supply Shall Accept A Logic Open Collector Level Which
- Wattage: 1350W
- Will Disable/Enable All The Output Voltage (Exclude +5v Stand By)
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:90 Output Current Peak:- Regulation Load:±6% Regulation Line:±50% Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:1 Output Current Max:67.5 Output Current Peak:- Regulation Load:±5% Regulation Line:±50% Output Ripple & Noise Max:70
- +5 VDC : Output Current Min:3.5 Output Current Max:75 Output Current Peak:- Regulation Load:±5% Regulation Line:±50% Output Ripple & Noise Max:700
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:3.5 Output Current Peak:- Regulation Load:+5/-6% Regulation Line:±50% Output Ripple & Noise Max:70
- -12 VDC: Output Current Min:0.05 Output Current Max:1.20 Output Current Peak:- Regulation Load:+5/-10% Regulation Line:±50% Output Ripple & Noise Max:120
- -5 VDC: Output Current Min:0.05 Output Current Max:1.2 Output Current Peak:- Regulation Load:+5/-10% Regulation Line:±50% Output Ripple & Noise Max:120
- Input (PS): VOLTAGE: DC –36 ~ -72V INPUT CURRENT: 40A (RMS) FOR -48 VDC INRUSH CURRENT: 20A MAX.
Applications
- None Available
Aliases
- None Available
Related Items
R1M-6250P
Zippy Technology R1M-6250P 250W Power Supply
RHR-6250P
250W VOLTAGE: 90 ~ 264 VAC FULL RANGE 618.60x93.50x41.60 (mm) 24.35x3.68x1.64
R1Z-6350P
Zippy Technology R1Z-6350P,1U Redundant Form,350W, Input Type Power Factor
R1Z-6400P
Zippy Technology R1Z-6400P,1U Redundant Form,400W, Input Type Power Factor