DR1M-6221F - Zippy Technologies DR1M-6221F DC 1U Redundnant Power Supply. Form Factor:...
Request Quote
For Price
- Part Number:
- DR1M-6221F
- Model Number:
- DR1M-6221F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DR1M-6221F DC 1U Redundnant Power Supply. Form Factor: Direct Current 1 Rack Unit Redundant (DC 1U Redundant) | Wattage: 220W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 3.3v / 5v remote sensing
- Connector power input
- Cooling: one 40mm dc fan
- Dielectric withstand: input / output 1500 vac for 1 second
- Dimensions (DxWxH): 10.24"/260mm x 7.09"/180mm x 1.59"/40.5mm
- Efficiency: 68% typical at -48vdc full load
- Emi noise filter: fcc class a, cispr22 class a
- Form Factor: Direct Current 1 Rack Unit Redundant (DC 1U Redundant)
- Hold up time: 1.6 ms minimum at full load & normal input voltage
- Humidity: operating: 20%-80%, non-operating: 10%-90%
- Input to frame ground 1500 vac for 1 second
- Input: DC -48V
- Over power protection: 110% ~ 160%
- Over voltage protection: +5v - 5.7v ~ 6.6v, 3.3v - 3.9v ~ 4.8v +12v - 13.0v ~ 15.0v
- Power good signal: on delay 100 ms to 500 ms, off delay 1 ms
- Remarks: 80% is normal condition and 90% is with special coating process
- Remote on / off control
- Safety: ul 60950, tüv en-60950, cb iec 60950, ccc gb4943-1995, gb9254-1998, gb17625.1-1998
- Short circuit protection: +5v, +12v, +3.3v, +5vsb, -5v, -12v
- Storage: -20C --- 80C
- Temperature range: operating: -10C --- 40C
- The unit shall accept a logic open collector level which will disable / enable all the output voltage (exclude +5v standby), as logic level is low, outputs voltage were enable, as logic level is high,
- Wattage: 220W
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:16 Output Current Peak:- Regulation Load:±5% Regulation Line:±50% Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:1 Output Current Max:15 Output Current Peak:- Regulation Load:±5% Regulation Line:±50% Output Ripple & Noise Max:50
- +5 VDC : Output Current Min:3 Output Current Max:25 Output Current Peak:- Regulation Load:±5% Regulation Line:±50% Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±50% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0 Output Current Max:0.50 Output Current Peak:- Regulation Load:±10% Regulation Line:±50% Output Ripple & Noise Max:150
- -5 VDC: Output Current Min:0 Output Current Max:0.50 Output Current Peak:- Regulation Load:±10% Regulation Line:±50% Output Ripple & Noise Max:150
- Input (PS): VOLTAGE: DC -36 V~ -72 V INPUT CURRENT: 7.0 A ( RMS ) FOR -48VDC INRUSH CURRENT: LESS THAN 10A FOR EACH MODULE
Applications
- None Available
Aliases
- None Available