AP1A-6150F - Zippy Technology AP1A-6150F,DC 1U Form,150W, Input Type DC +12V, (DxWxH)...
- Part Number:
- AP1A-6150F
- Model Number:
- AP1A-6150F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technology AP1A-6150F,DC 1U Form,150W, Input Type DC +12V, (DxWxH) 190/7.48 (mm/inch) x 100/3.94 (mm/inch) x 39/1.54 (mm/inch) Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- As logic level is high, outputs voltage were disable.
- As logic level is low, outputs voltage were enable,
- Cooling: 38mm dc fans
- Dielectric withstand: input/output 1500 vac for 1 second
- Disable/enable all the output voltage (exclude +5v stand by).
- Efficiency: min 70% at dc 12 input
- Emi noise filter: fcc class a, cispr22 class a
- Hold up time: 1.6ms minimum at full load & nominal input voltage
- Humidity :operating:20%-95%, non-operating:10%-95%
- Input to frame ground 1500 vac for 1 second
- Over voltage protection: +5v-5.5v~7.0v , +3.3v-4.0v~4.5v
- Overload protection: 110~150%
- Power good signal: on delay 100ms to 500ms,off delay 1ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on/off control
- Safety : ul 60950, csa 22.2 no 950, tuv en-60950
- Short circuit protection: +5v +12v +3.3v
- Temperature range: operating 0C~40C
- The unit shall accept a logic open collector level which will
Specifications
- +12V1 VDC: Output Current Min:0.8 Output Current Max:12 Output Current Peak:- Regulation Load:±8% Regulation Line:±1% Output Ripple & Noise Max:100
- +3.3 VDC: Output Current Min:0 Output Current Max:10 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 VDC : Output Current Min:0.8 Output Current Max:12 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:1.2 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:100
- -5 VDC: Output Current Min:0 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:50
- Input (PS): VOLTAGE: DC -10V ~ -15V INPUT CURRENT: 19.0A (RMS) FOR 12 VDC INRUSH CURRENT: 20.0A MAX.
Applications
- None Available
Aliases
- None Available
Related Items
B1U-6150F
Zippy Technologies B1U-6150F DC 1U Power Supply. Form Factor: Direct
P1M-6350P
Zippy Technology P1M-6350P,1U Form,350W, Input Type Power Factor Correction
P1M-6400P
Zippy Technology P1M-6400P,1U Form,400W, Input Type Power Factor Correction
D1U-6150F
Zippy D1U-6150F Power Supply - 1U Single 150W