BP1H-6300F - Zippy Technology BP1H-6300F Power Supply. 1U Form | 300W |...
Request Quote
For Price
- Part Number:
- BP1H-6300F
- Model Number:
- BP1H-6300F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technology BP1H-6300F Power Supply. 1U Form | 300W | DC +24V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- As logic level is high, outputs voltage were disable
- As logic level is low, outputs voltage were enable
- Cooling: two 40mm dc fans
- Dielectric withstand: input/output 1500 vac for 1 second
- Dimensions (DxWxH): 8.86"/225mm x 3.94"/100mm x 1.59"/40.5mm
- Efficiency: 65% typical, at full load
- Emi noise filter: fcc class a, cispr22 class a
- Form Factor: Direct Current 1 Rack Unit (DC 1U)
- Hold up time: 1.6ms minimum at full load & nominal input voltage
- Humidity: operating: 20%-95%, non-operating:10%-95%
- Input to frame ground 1500 vac for 1 second
- Input: DC 24V
- Over voltage protection:+5v-5.5v~7.0v , +3.3v-4.0v~4.5v
- Overload protection:130±20%
- Power good signal: on delay 100ms to 500ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on/off control
- Safety: ul 60950, csa 22.2 iec60950, tuv en60950
- Short circuit protection:+5v +12v +3.3v
- Temperature range: operating 10C~40C
- The unit shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by).
- Wattage: 300W
Specifications
- +12V1 VDC: Output Current Min:1 Output Current Max:22 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:1 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:80
- +5 VDC : Output Current Min:1 Output Current Max:35 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:80
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0.1 Output Current Max:0.5 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:150
- -5 VDC: Output Current Min:0.1 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:120
- Input (PS): VOLTAGE: DC 20V~28V INPUT CURRENT:20.0A (RMS) FOR 24 VDC INRUSH CURRENT:20.0A MAX.
Applications
- None Available
Aliases
- None Available