DGIN-6350F - Zippy Technologies DGIN-6350F DC N + 1 Power Supply. Form...
- Part Number:
- DGIN-6350F
- Model Number:
- DGIN-6350F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DGIN-6350F DC N + 1 Power Supply. Form Factor: Direct Current Component Plus One (DC N + 1) | Wattage: 350W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 3.3v/5v remote sensing
- Connector power input: A. Positronic: plb06m connector, B. Terminal block.
- Cooling: one 40mm dc fan
- Dielectric withstand: input/output 1500 vac for 1 second, input to frame ground 1500 vac for 1 second
- Dimensions (DxWxH): 9.84"/250mm x 3.11"/79mm x 3.11"/79mm x 1.59"/40.5mm x 1.95"/40.5mm
- Efficiency: 65% typical at -48vdc full load
- Emi noise filter: fcc class a, cispr22 class a
- Form Factor: Direct Current Component Plus One (DC N + 1)
- Hold up time: 1.6ms minimum at full load & normal input voltage
- Humidity: operating:20%-95%, non-operating: 10%-95%
- Input: DC -48V
- Over power protection: 110~160%
- Power good signal: on delay 100ms to 500ms, off delay 1ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on /off control
- Safety: ul 1950, csa 22.2 no/950, tuv iec 950
- Short circuit protection: +5v, +12v, +3.3v, +5vsb
- Temperature range: operating: -10C---40C (-36v~-72vdc input), -10C---50C (-46v~-72vdc input), storage: -20C---80C
- The unit shall accept a logic open collector level which will disable/enable all the output voltage(exclude +5v standby), as logic level is low, outputs voltage were enable, as logic level is high, ou
- Wattage: 350W
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:22 Output Current Peak:- Regulation Load:±5% Regulation Line:±120mV Output Ripple & Noise Max:150
- +3.3 VDC: Output Current Min:1 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:80
- +5 VDC : Output Current Min:3 Output Current Max:35 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:80
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:80
- -12 VDC: Output Current Min:0.1 Output Current Max:0.8 Output Current Peak:- Regulation Load:±10% Regulation Line:±120mV Output Ripple & Noise Max:150
- -5 VDC: Output Current Min:0.1 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±120mV Output Ripple & Noise Max:150
- Input (PS): VOLTAGE: DC -36V~ -72V INPUT CURRENT: 15A(RMS)FOR -48VDC INRUSH CURRENT: LESS THAN 10A
Applications
- None Available
Aliases
- None Available
Related Items
B1U-6150F
Zippy Technologies B1U-6150F DC 1U Power Supply. Form Factor: Direct
P1M-6350P
Zippy Technology P1M-6350P,1U Form,350W, Input Type Power Factor Correction
P1M-6400P
Zippy Technology P1M-6400P,1U Form,400W, Input Type Power Factor Correction
D1U-6150F
Zippy D1U-6150F Power Supply - 1U Single 150W