DMIN-6220F - Zippy DMIN-6220F Power Supply - Redundant Module 220W Simple Type:...
- Part Number:
- DMIN-6220F
- Model Number:
- DMIN-6220F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy DMIN-6220F Power Supply - Redundant Module 220W Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Cooling: 40mm dc fans
- Dielectric withstand: input/output 1500 vac for 1 second, input o frame ground 1500 vac for 1 second
- Efficiency: 68% typical, at full load
- Emi noise filter: fcc class a, cispr22 class a
- Hold up time: 1.6ms minimum at full load & nominal input voltage
- Humidity: operating: 20%-95%, non-operating: 10%-95%
- Over load protection: 130+_20%
- Power good signal: on delay 100ms to 500ms, off delay 1ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on /off control
- Safety: ul 1950, csa 22.2 no/950, tuv iec 950
- Short circuit protection: +5v, +12v, +3.3v
- Temperature range: operating -10C---40C
- The unit shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v standby), as logic level is low, outputs voltage were enable, as logic level is high, o
Specifications
- +12V1 VDC: Output Current Min:1 Output Current Max:16 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:1 Output Current Max:15 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:80
- +5 VDC : Output Current Min:1 Output Current Max:25 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:80
- +5 Vsb DC: Output Current Min:0 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:150
- -5 VDC: Output Current Min:0 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:120
- Input (PS): VOLTAGE: DC -36V ~ -72V INPUT CURRENT: 7.0A (RMS) FOR -48 VDC INRUSH CURRENT: 10A MAX. FOR EACH POWER UNIT
Applications
- None Available
Aliases
- None Available
Related Items
B1U-6150F
Zippy Technologies B1U-6150F DC 1U Power Supply. Form Factor: Direct
P1M-6350P
Zippy Technology P1M-6350P,1U Form,350W, Input Type Power Factor Correction
P1M-6400P
Zippy Technology P1M-6400P,1U Form,400W, Input Type Power Factor Correction
D1U-6150F
Zippy D1U-6150F Power Supply - 1U Single 150W