DP1A-6300F - Zippy Technologies DP1A-6300F DC 1U Power Supply. Form Factor: Direct...
Request Quote
For Price
- Part Number:
- DP1A-6300F
- Model Number:
- DP1A-6300F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DP1A-6300F DC 1U Power Supply. Form Factor: Direct Current 1 Rack Unit (DC 1U) | Wattage: 300W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Cooling: 40mm dc fans
- Dielectric withstand: input / output 1500 vac for 1 second input to frame ground 1500 vac for 1 second
- Dimensions (DxWxH): 8.07"/205mm x 3.94"/100mm x 1.59"/40.5mm
- Efficiency: 65% typical, at full load
- Emi noise filter: fcc class b, cispr22 class b
- Form Factor: Direct Current 1 Rack Unit (DC 1U)
- Hold up time: 1.6 ms minimum at full load & nominal input voltage
- Humidity: operating: 20%-95%, non-operating: 10%-95%
- Humidity: operating: 20%-95%, non-operating: 10%-95%
- Input: DC -48V
- Over power protection: 110%~150%
- Over voltage protection: +5v - 5.5v ~6.5v, 3.3v -3.9v~5v, 12v-13~15v
- Power good signal: on delay 100 ms to 500 ms, off delay 1 ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on / off control
- Safety: ul, csa, tüv, ccc, gost
- Short circuit protection: +5v, -5v, +12v, , -12v, +3.3v
- Temperature range: operating 0 to 40 degrees centigrade
- The unit shall accept a logic open collector level which will disable / enable all the output voltage (exclude +5v standby), as logic level is low, outputs voltage were enable, as logic level is high,
- Wattage: 300W
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:1 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:80
- +5 VDC : Output Current Min:3 Output Current Max:24 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:1.5 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0.05 Output Current Max:0.5 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:150
- -5 VDC: Output Current Min:0.05 Output Current Max:0.5 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120
- Input (PS): VOLTAGE: RANGE:-36VDC ~ -72VDC NORMAL:-48VDC INPUT CURRENT: 10A AT -48 VDC INRUSH CURRENT : LESS THAN 10A
Applications
- None Available
Aliases
- None Available