DP1H-6350F - Zippy Technologies DP1H-6350F DC 1U Power Supply. Form Factor: Direct...
Request Quote
For Price
- Part Number:
- DP1H-6350F
- Model Number:
- DP1H-6350F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DP1H-6350F DC 1U Power Supply. Form Factor: Direct Current 1 Rack Unit (DC 1U) | Wattage: 350W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 3.3v/5v remote sensing
- A. Positronic; plb06m connector
- B. Terminal block
- Connector power input
- Cooling: one 40mm dc fan
- Dielectric withstand: input/output 1500 vac for 1 second
- Dimensions (DxWxH): 8.86"/225mm x 3.94"/100mm x 1.59"/40.5mm
- Efficiency: 65% typical at -48vdc full loading
- Emi noise filter: fcc class a, cispr22 class a
- Form Factor: Direct Current 1 Rack Unit (DC 1U)
- Hold up time: 1.6ms minimum at full load & normal input voltage
- Humidity: operating: 20%-95%, non-operating: 10%-95%
- Input to frame ground 1500 vac for 1 second
- Input: DC -48V
- Over power protection: 110%~150%
- Over voltage protection: +5v-5.5v~6.5v, 3.3v-3.9v~5.0v, +12v-13.0v~15.0v
- Power good signal: on delay 100ms to 500ms, off delay 1ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on/off control
- Safety: ul 1950, csa 22.2 no/950, tuv iec 950
- Short circuit protection: +5v, -5v, +12v, -12v, +3.3v, +5vsb
- Storage: -20C---80C
- Temperature range: operating: -10C---40C (-36v~-72vdc input) -10C---50C (-40v~-72vdc input)
- The unit shall accept a logic open collector level which will disable/enable all the output voltage(exclude +5v standby), as logic level is low, outputs voltage were enable, as logic level is high, ou
- Wattage: 350W
Specifications
- +12V1 VDC: Output Current Min:1 Output Current Max:22 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:1 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:50
- +5 VDC : Output Current Min:1 Output Current Max:35 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0.1 Output Current Max:0.5 Output Current Peak:- Regulation Load:±5% Regulation Line:±50Mv Output Ripple & Noise Max:150
- -5 VDC: Output Current Min:0.1 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±50mV Output Ripple & Noise Max:150
- Input (PS): Voltage: DC -36V~-72V Input current: 12.0/17.0A(RMS) for -48VDC Inrush current:less than 10A
Applications
- None Available
Aliases
- None Available