H1A-6400P - Zippy Technology H1A-6400P,1U Form,400W, Input Type Power Factor Correction...
- Part Number:
- H1A-6400P
- Model Number:
- H1A-6400P
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technology H1A-6400P,1U Form,400W, Input Type Power Factor Correction (PFC), (DxWxH) 155/6.1 (mm/inch) x 100/3.94 (mm/inch) x 40/1.57 (mm/inch) Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 3.3v/5v remote sensing
- Cooling: two 40mm dc fans
- Dielectric withstand: input/output 1500 vac for 1 second
- Efficiency: 65% typical, at full load.
- Emi noise filter: fcc class b, cispr22 class b.
- Hold up time: 16ms minimum at full load & nominal input voltage
- Humidity: operating: 20%-95%, non-operating: 10%-95%
- Input to frame ground 1500 vac for 1 second
- Meet iec-1000-3-2 class d
- Over power protection: 110~150% max
- Over voltage protection: +5v - 5.7v ~ 6.5v, +3.3v-3.7v~4.1v,+12v - 13.3v ~ 14.3v
- Power good signal: on delay 100 ms to 500 ms, off delay 1 ms.
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on/off control the unit shall accept a logic open collector level which will disabel/enable all the output voltage(exclude +5v standby), as logic level is low, outputs voltage were enable, as l
- Safety: ul 1950, csa 22.2 no/950, tuv iec 950
- Short circuit protection: +5v, -5v, +12v, -12v, +3.3v
- Temperature range: operating 0C --- 40C, storage –20C~80C
Specifications
- +12V1 VDC: Output Current Min:1 Output Current Max:28 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:100
- +3.3 VDC: Output Current Min:1 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 VDC : Output Current Min:2 Output Current Max:25 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0 Output Current Max:0.5 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:100
- Input (PS): VOLTAGE: 90 ~ 264 VAC FULL RANGE FREQUENCY: 47 ~ 63Hz INPUT CURRENT: 8A (RMS) FOR 115 VAC, 5A (RMS) FOR 230 VAC INRUSH CURRENT: 60A MAX. FOR 115 VAC, 80A MAX. FOR 230 VAC
Applications
- None Available
Aliases
- None Available
Related Items
B1U-6150F
Zippy Technologies B1U-6150F DC 1U Power Supply. Form Factor: Direct
P1M-6350P
Zippy Technology P1M-6350P,1U Form,350W, Input Type Power Factor Correction
P1M-6400P
Zippy Technology P1M-6400P,1U Form,400W, Input Type Power Factor Correction
D1U-6150F
Zippy D1U-6150F Power Supply - 1U Single 150W