H1H-6507P - Zippy Technology H1H-6507P,1U Form,500W, Input Type Power Factor Correction...
- Part Number:
- H1H-6507P
- Model Number:
- H1H-6507P
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technology H1H-6507P,1U Form,500W, Input Type Power Factor Correction (PFC), (DxWxH) 250/9.84 (mm/inch) x 100/3.94 (mm/inch) x 40.5/1.59 (mm/inch) Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- As logic level is high, outputs voltage were disable.
- As logic level is low, outputs voltage were enable
- Cooling: two 38mm dc fans
- Dielectric withstand: input/output 1500 vac for 1 second
- Efficiency: 65% typical, at full load
- Emi noise filter : fcc class b, cispr22 class b
- Hold up time: 16ms minimum at full load & nominal input voltage
- Humidity: operating: 20%-95%, non-operating: 10%-95%
- Input to frame ground 1500 vac for 1 second
- Meet iec-1000-3-2 class d
- Over voltage protection: +5v-5.7v~6.5v , +3.3v-3.7v~4.1v , +12v-12.8v~13.9v
- Overload protection: 110~150% max
- Power good signal: on delay 100ms to 500ms,off delay 1ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on/off control
- Safety : ul 1950, csa 22.2 no 950, tuv iec 950
- Short circuit protection:+5v, -5v, +12v, -12v, +3.3v
- Temperature range: operating 0C~40C
- The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by).
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:40 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:1 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 VDC : Output Current Min:3 Output Current Max:25 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0 Output Current Max:0.5 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120
- -5 VDC: Output Current Min:0 Output Current Max:0.5 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120
- Input (PS): VOLTAGE:90~264VAC FULL RANGE FREQUENCY: 47~63HZ INPUT CURRENT:10A (RMS) FOR 115 VAC 6A (RMS) FOR 230 VAC INRUSH CURRENT:60A MAX. FOR 115 VAC 80A MAX. FOR 230 VAC
Applications
- None Available
Aliases
- None Available
Related Items
B1U-6150F
Zippy Technologies B1U-6150F DC 1U Power Supply. Form Factor: Direct
P1M-6350P
Zippy Technology P1M-6350P,1U Form,350W, Input Type Power Factor Correction
P1M-6400P
Zippy Technology P1M-6400P,1U Form,400W, Input Type Power Factor Correction
D1U-6150F
Zippy D1U-6150F Power Supply - 1U Single 150W