M1G-6500P - Zippy M1G-6500P Power Supply

M1G-6500P - Zippy M1G-6500P Power Supply - 1U Single 500W Simple Type:...

Zippy M1G-6500P Power Supply - 1U Single 500W Simple Type: Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

3.3v/5v remote sensing
Cooling: 40mm dc fan
Dielectric withstand: input/output 1500 vac for 1 second
Efficiency: 67% typical at 115vac full load
Emi noise filter: fcc class a, cispr22 class a
Hold up time: 16 ms minimum at full load & normal input voltage
Humidity: operating: 20%-95%, non-operating: 10%-95%
Input to frame ground 1500vac for 1 second
Over current protection: 110%~160%
Over power protection: 110%~170%
Over voltage protection: +5v-5.7v~6.5v, 3.3v-3.9v~4.7v, +12v-13.3v~14.3v
Power good signal: on delay 100ms to 500ms, off delay 1 ms
Remarks: 85% is normal condition and 95% is with special coating process
Remote on / off control
Safety: ul 1950, csa 22.2 no/950, tuv iec 950
Short circuit protection: +5v, -5v, +12v, -12v, +3.3v, +5vsb
Storage: -20C---80C
Temperature range: operating: 0C---40C
The unit shall accept a logic open collector level which will disable/enable all the output voltage(exclude +5v standby), as logic level is low, outputs voltage were enable, as logic level is high, ou

General

+12V1 VDC: Output Current Min:1 Output Current Max:26 Output Current Peak:- Regulation Load:±6% Regulation Line:±50mV Output Ripple & Noise Max:120
+12V2 VDC: Output Current Min:1 Output Current Max:26 Output Current Peak:- Regulation Load:±6% Regulation Line:±50mV Output Ripple & Noise Max:120
+3.3 VDC: Output Current Min:1 Output Current Max:24 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:70
+5 VDC : Output Current Min:1.5 Output Current Max:24 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:70
+5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5%,-6% Regulation Line:±50mV Output Ripple & Noise Max:70
-12 VDC: Output Current Min:0.05 Output Current Max:0.7 Output Current Peak:- Regulation Load:±5%,-10% Regulation Line:±50mV Output Ripple & Noise Max:120
-5 VDC: Output Current Min:0.05 Output Current Max:0.7 Output Current Peak:- Regulation Load:±5%,-10% Regulation Line:±50mV Output Ripple & Noise Max:120
Input (PS): VOLTAGE: 90 ~ 264VAC FREQUENCY:47 ~ 63Hz INPUT CURRENT: 9.0~4.5A MAX AT ANY LOW/HIGH INPUT VOLTAGE INRUSH CURRENT: 65/125A @ 110/220VAC(25?) POWER FACTOR CORRECTION: 95% @110V, FULL LOAD