DR2G-6350F - Zippy Technologies DR2G-6350F DC 2U Redundant Power Supply. Form Factor:...
- Part Number:
- DR2G-6350F
- Model Number:
- DR2G-6350F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DR2G-6350F DC 2U Redundant Power Supply. Form Factor: Direct Current 2 Rack Units Redundnant (DC 2U Redundant) | Wattage: 350W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 3.3v / 5v remote sensing
- A. Positronic: plb06m connector
- B. Terminal block
- Connector power input
- Dielectric withstand: input / output 1500 vac for 1 second input to frame ground 1500 vac for 1 second
- Dimensions (DxWxH): 11.81"/300mm x 3.98"/101mm x 3.23"/82mm
- Efficiency: 65% typical at -48vdc full load
- Emi noise filter: fcc class a, cispr22 class a
- Form Factor: Direct Current 2 Rack Units Redundnant (DC 2U Redundant)
- Hold up time: 1.6 ms minimum at full load & normal input voltage
- Input: DC -48V
- Over power protection: 110% ~ 160%
- Over voltage protection: +5v - 5.7v ~ 6.7v, 3.3v - 3.7v ~ 4.7v +12v - 13.0v ~ 15.0v over current Protection: 110% ~ 150%
- Power good signal: on delay 100 ms to 500 ms, off delay 1 ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on / off control
- Safety: ul 1950, csa 22.2 no/ 950, tüv iec 950
- Short circuit protection: +5v, -5v, +12v, -12v, +3.3v, +5vsb
- Temperature range: operating: -10C --- 40C (-36v ~-72vdc input) -10C --- 50C (-46v~-72vdc input) Storage: -20C --- 80C humidity: operating: 20%-95%, non-operating: 10%-95%
- The unit shall accept a logic open collector level which will disable / enable all the output voltage (exclude +5v standby), as logic level is low, outputs voltage were enable, as logic level is high,
- Wattage: 350W
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:22 Output Current Peak:- Regulation Load:±5% Regulation Line:±120mV Output Ripple & Noise Max:100
- +3.3 VDC: Output Current Min:1 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:50
- +5 VDC : Output Current Min:3 Output Current Max:35 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0.1 Output Current Max:0.8 Output Current Peak:- Regulation Load:±10% Regulation Line:±120mV Output Ripple & Noise Max:150
- -5 VDC: Output Current Min:0.1 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±120mV Output Ripple & Noise Max:150
- Input (PS): VOLTAGE: DC -36 V~ -72 V INPUT CURRENT: 15.0 A ( RMS ) FOR -48VDC INRUSH CURRENT: LESS THAN 10A FOR EACH MODULE
Applications
- None Available
Aliases
- None Available
Related Items
R2W-6400P
Zippy Technology R2W-6400P,2U Redundant Form,400W, Input Type Power Factor
R2W-6460P
Zippy Technology R2W-6460P,2U Redundant Form,460W, Input Type Power Factor
R2W-6500P
Zippy Technology R2W-6500P,2U Redundant Form,500W, Input Type Power Factor
SCB7-2100P
1800W VOLTAGE: 90 ~ 264 VAC FULL RANGE 220.00x292.00x79.00 (mm) 8.66x11.50x3.11