R2W-5600P3V - Zippy Technologies R2W-5600P3V 2U Redundant Power Supply. Form Factor: 2...
Request Quote
For Price
- Part Number:
- R2W-5600P3V
- Model Number:
- R2W-5600P3V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies R2W-5600P3V 2U Redundant Power Supply. Form Factor: 2 Rack Units Redundant (2U Redundant) | Wattage: 600W | Input: PFC Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Ac inlet in each module
- Cooling: two 38mm dc fan (module)
- Dielectric withstand: input/output 1500 vac for 1 minute
- Dimensions (DxWxH): 11.81"/300mm x 3.98"/101mm x 3.23"/82mm
- Efficiency: 65% typical, at full load
- Emi noise filter: fcc class b, cispr22 class b
- Faulty alarm methods: led , buzzer, ttl signal
- Form Factor: 2 Rack Units Redundant (2U Redundant)
- Hold up time: 16ms min. At full load & 90 vac input voltage
- Hot-swappable/hot pluggable redundancy function
- Humidity: operating: 20%-95%, non-operating: 10%-95%
- Input to frame ground 1500 vac for 1 minute
- Input: PFC
- Isolation: built-in the power module
- Meet iec-1000-3-2 class d (active pfc)
- Over power protection: 110% ~ 150%
- Over voltage protection: +5v -> 5.7v ~ 6.5v, 3.3v -> 3.7v ~ 4.3v +12v -> 13.3v ~ 15v
- Power good signal: on delay 100ms to 500ms, off delay 1ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on/off control
- Remote sensing design
- Safety: ul 1950, csa 22.2 no/ 950, tüv iec 950
- Short circuit:5v,12v,3.3v 130%±20% at full load
- Temperature range: operating 0C~40C, storage -20C~70C
- Wattage: 600W
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:42 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:70
- +3.3 VDC: Output Current Min:1 Output Current Max:24 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 VDC : Output Current Min:1 Output Current Max:32 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0 Output Current Max:1 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:70
- Input (PS): VOLTAGE: 90~264VAC FULL RANGE FREQUENCY: 47~63HZ INPUT CURRENT: 5A(RMS)FOR 230VAC 10A(RMS)FOR 115VAC INRUSH CURRENT: 125A MAX FOR 115 VAC PER MODULE 150A MAX FOR 230 VAC PER MODULE
Applications
- None Available
Aliases
- None Available