DM1L-5700V - Zippy Technologies DM1L-5700V DC N + 1 Power Supply. Form...
- Part Number:
- DM1L-5700V
- Model Number:
- DM1L-5700V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DM1L-5700V DC N + 1 Power Supply. Form Factor: Direct Current Component Plus One (DC N + 1) | Wattage: 700W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- As logic level is low, outputs voltage were enable, as logic level is high, outputs voltage were disable.
- Cooling: two 38mm dc fans
- Dielectric withstand: input/output 1800 vac for 1 second input to frame ground 1800 vac for 1 second
- Dimensions (DxWxH): 11.63"/295.3mm x 3.87"/98.4mm x 1.59"/40.5mm
- Efficiency: typical 80% at -48v, full load
- Emi noise filter: cispr22 class a
- Form Factor: Direct Current Component Plus One (DC N + 1)
- Hold up time: dc output 5v must be maintain 1 msec in -48v
- Input: DC -48V
- Over current protection: +5v, +12v, +3.3v: 110~150%
- Over power protection: 110~150% max
- Over voltage protection: +12v-12.9~14.2v, +5v-5.8~6.8v, +3.3v-3.7~4.5v
- Power good signal: on delay 100ms to 550ms
- Remote on/off control
- Safety: to meet ul, cul, tuv
- Short circuit protection: +12v, +5v, +3.3v, -12v
- Temperature range: operating 0C~50C (600w: 0C~60C), storage -20C~80C
- The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by).
- Wattage: 700W
Specifications
- Dimensions: 295.30x98.40x40.00 (mm), 11.63x3.87x1.57 (inch).
- Inrush Current: 30a At -48vdc (At 25 Degrees Ambient Cold Start)
- Output Voltage +12V: Output Current Min 2. Output Current Max 55. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 120mV.
- Output Voltage +3.3V: Output Current Min 0.5. Output Current Max 36. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
- Output Voltage +5V: Output Current Min 0.5. Output Current Max 32.00. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
- Output Voltage +5VSB: Output Current Min 0.1. Output Current Max 3.5. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
- Output Voltage -12V: Output Current Min 0. Output Current Max 0.8. Regulation Load ±10%, Regulation Line ±1%, Output Ripple & Noise Max 120mV.
- Steady-State Current: 19 Amp At -48vdc
- Voltage: -36~-72vdc, Normal -48vdc
Applications
- None Available
Aliases
- None Available
Related Items
P1H-5507V
Zippy P1H-5507V 1U Power Supply. Form Factor: 1 Rack Unit
P1H-5407V
Zippy P1H-5407V 1U Power Supply. Form Factor: 1 Rack Unit
P1S-5180V
Zippy Technology P1S-5180V,1U Form,180W, Input Type Power Factor Correction
DM1Q-2650V
650W VOLTAGE: -36 ~ -72VDC INPUT CURRENT:25A (RMS) FOR 36VDC INRUSH CURRENT:30A MAX. 325.00x52.00x40.50