DM1L2-5600V3V - Zippy DM1L2-5600V3V DC 2U Redundant Power Supply. Form Factor: Direct...
- Part Number:
- DM1L2-5600V3V
- Model Number:
- DM1L2-5600V3V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy DM1L2-5600V3V DC 2U Redundant Power Supply. Form Factor: Direct Current 2 Rack Units Redundnant (DC 2U Redundant) | Wattage: 600W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- As logic level is low, outputs voltage were enable, as logic level is high, outputs voltage were disable.
- Cooling: two 38x38x28mm dc fans
- Dc inlet in each module
- Dielectric withstand: input/output 1500 vac for 1 minute input to frame ground 1500 vac for 1 minute
- Dimensions (DxWxH): 330mm/12.99" x 101.2mm/3.98" x 84mm/3.31"
- Efficiency: 80% typical, at input -48v full load
- Emi: fcc class a, cispr 22 class a
- Form Factor: Direct Current 2 Rack Units Redundnant (DC 2U Redundant)
- Hold up time: 1ms min. At full load
- Input: DC -48V
- Over power protection: 110~150% max
- Over voltage protection: +5v-5.7v~6.5v, +3.3v-3.9v~4.3v, +12v-13.3v~14.3v
- Power good signal: on delay 100ms to 500ms, off delay 1ms
- Remote on / off control
- Safety: to meet ul, cul, tuv
- Short current protection:+5v,+12v,+3.3v
- Temperature range: operating 0C~50C, storage -20C~80C
- The unit shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by).
- Wattage: 600W
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:45.00 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120mV
- +3.3 VDC: Output Current Min:0.5 Output Current Max:36.00 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50mV
- +5 VDC : Output Current Min:0.5 Output Current Max:32.00 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50mV
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:3.50 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50mV
- -12 VDC: Output Current Min:0.05 Output Current Max:0.80 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:120mV
- Input (PS): VOLTAGE: -36 ~ -72 VDC, NORMAL -48VDC INPUT CURRENT:16A(RMS)FOR -48VDC INRUSH CURRENT:30A MAX.
Applications
- None Available
Aliases
- None Available
Related Items
P1H-5507V
Zippy P1H-5507V 1U Power Supply. Form Factor: 1 Rack Unit
P1H-5407V
Zippy P1H-5407V 1U Power Supply. Form Factor: 1 Rack Unit
P1S-5180V
Zippy Technology P1S-5180V,1U Form,180W, Input Type Power Factor Correction
DM1Q-2650V
650W VOLTAGE: -36 ~ -72VDC INPUT CURRENT:25A (RMS) FOR 36VDC INRUSH CURRENT:30A MAX. 325.00x52.00x40.50