GIN-3600V - Zippy Technologies GIN-3600V AC N + 1 Power Supply. Form...
- Part Number:
- GIN-3600V
- Model Number:
- GIN-3600V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies GIN-3600V AC N + 1 Power Supply. Form Factor: Alternating Current Component Plus One (AC N + 1) | Wattage: 600W | Input: PFC Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- As logic level is low, outputs voltage were enable, as logic level is high, outputs voltage were disable.
- As logic level is low, outputs voltage were enable, as logic level is high, outputs voltage were disable.
- Cooling: 40mm dc fans (one module)
- Cooling: 40mm dc fans (one module)
- Current/balance load sharing design
- Current/balance load sharing design
- Dielectric withstand: input/output 1500 vac for 60 second input to frame ground 1500 vac for 60 second
- Dielectric withstand: input/output 1500 vac for 60 second input to frame ground 1500 vac for 60 second
- Dimensions (DxWxH): 9.84"/250mm x 3.11"/79mm x 3.11"/79mm x 1.59"/40.5mm x 1.95"/40.5mm
- Efficiency: typical >82% at 115vac, 20%~100% max load
- Efficiency: typical >82% at 115vac, 20%~100% max load
- Emi noise filter: fcc class b, cispr22 class b
- Emi noise filter: fcc class b, cispr22 class b
- Form Factor: Alternating Current Component Plus One (AC N + 1)
- Hold up time: 16ms minimum at full load & nominal input voltage
- Hold up time: 16ms minimum at full load & nominal input voltage
- Hot-swappable function
- Hot-swappable function
- Input: PFC
- Isolation: built-in in power module
- Isolation: built-in in power module
- Leakage current: 3.5ma max at nominal voltage 250vac
- Leakage current: 3.5ma max at nominal voltage 250vac
- N+1 redundancy function
- N+1 redundancy function
- Over power protection: 110% ~ 160%
- Over power protection: 110% ~ 160%
- Over voltage protection: +12v-13.3v~14.3v
- Over voltage protection: +12v-13.3v~14.3v
- Power factor correction: active (meet iec-1000-3-2)
- Power factor correction: active (meet iec-1000-3-2)
- Power good signal: on delay 100ms to 500ms
- Power good signal: on delay 100ms to 500ms
- Remote on/off control
- Remote on/off control
- Safety: to meet ul, cul, tuv
- Safety: to meet ul, cul, tuv
- Short circuit protection: shut down and latch off
- Short circuit protection: shut down and latch off
- Temperature range: operating 0C~40C, storage -20C~80C
- Temperature range: operating 0C~40C, storage -20C~80C
- The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v standby).
- The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v standby).
- Wattage: 600W
Specifications
- Dimensions: 250.00x79.00x40.50 (mm), 9.84x3.11x1.59 (inch).
- Frequency: 47~63hz
- Input current: 8a/4a (115 / 230 vac) power module
- Inrush current: 60a/80a max. For 115/230 vac power module
- Output Voltage +12V: Output Current Min 2. Output Current Max 48. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 120mV.
- Output Voltage +5VSB: Output Current Min 0.1. Output Current Max 3.5. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
- Output Voltage +5VSB: Output Current Min 0.1. Output Current Max 3.5. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
- Output Voltage -12V: Output Current Min 0. Output Current Max 0.8. Regulation Load ±10%, Regulation Line ±1%, Output Ripple & Noise Max 120mV.
- Voltage: 90~264vac full range
Applications
- None Available
Aliases
- None Available
Related Items
P1H-5507V
Zippy P1H-5507V 1U Power Supply. Form Factor: 1 Rack Unit
P1H-5407V
Zippy P1H-5407V 1U Power Supply. Form Factor: 1 Rack Unit
P1S-5180V
Zippy Technology P1S-5180V,1U Form,180W, Input Type Power Factor Correction
DM1Q-2650V
650W VOLTAGE: -36 ~ -72VDC INPUT CURRENT:25A (RMS) FOR 36VDC INRUSH CURRENT:30A MAX. 325.00x52.00x40.50