GIN1-5800V4D - Zippy Technology GIN1-5800V4D,EASYSWAP Form,800W, Input Type Power Factor Correction...
Request Quote
For Price
- Part Number:
- GIN1-5800V4D
- Model Number:
- GIN1-5800V4D
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technology GIN1-5800V4D,EASYSWAP Form,800W, Input Type Power Factor Correction (PFC), (DxWxH) 397/15.63 (mm/inch) x 79/3.11 (mm/inch) x 40/1.57 (mm/inch), High Effenciency Series Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Dielectric withstand: input/output 1500 vac for 1 minute input to frame ground 1500 vac for 1 minute
- Efficiency: typical >80% at 25C115v, 20%~100% max load
- Hold up time: when power shutdown dc output 5v must be maintain 16msec in regulation limit at normal input voltage.
- Over power protection:110~160% max
- Over voltage protection: +12v-13v~15v, +5v-5.9v~6.7v, +3.3v-3.9v~4.3v
- Power good signal: on delay 100ms to 500ms,off delay 1ms
- Restart after protection: after the protection mode(opp/ovp) or short circuit is removed and a power On/off cycle is initiated, the power supply will restart. If the psu is using ac power switch to c
- Safety: to meet ul, cul, tuv, ccc
- Short circuit protection: +5v, +12v, -12v, +3.3v, auto-recovered: +5vsb
- Temperature range: operating 0C~40C,storage -20C~80C
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:60.00 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120mV
- +3.3 VDC: Output Current Min:0.5 Output Current Max:25.00 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50mV
- +5 VDC : Output Current Min:0.5 Output Current Max:25.00 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50mV
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:3.50 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50mV
- -12 VDC: Output Current Min:0 Output Current Max:0.80 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:120mV
- Input (PS): VOLTAGE: 90~264VAC FULL RANGE FREQUENCY: 47~63HZ INPUT CURRENT:6A(RMS)FOR 230VAC 12A(RMS)FOR 115VAC INRUSH CURRENT:60A MAX. FOR 115 VAC PER MODULE 80A MAX. FOR 230 VAC PER MODULE
Applications
- None Available
Aliases
- None Available