MP2M-5435V - Zippy MP2M-5435V 2U Power Supply. Form Factor: 2 Rack Units...
Request Quote
For Price
- Part Number:
- MP2M-5435V
- Model Number:
- MP2M-5435V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy MP2M-5435V 2U Power Supply. Form Factor: 2 Rack Units (2U) | Wattage: 435W | Input: PFC Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Dielectric withstand: input/output 1500 vac for 1 minute
- Dimensions (DxWxH): 270mm/10.63" x 100mm/3.94" x 70mm/2.76"
- Efficiency: typical 80-83% at 110v full load
- EMI noise filter: fcc class b , cispr 22 class b
- Form Factor: 2 Rack Units (2U)
- Hold up time: 16ms min.
- Humidity: operating: 20%-95%, non-operating:10%-95%
- Input to frame ground 1500 vac for 1 minute
- Input: PFC
- Leakage current: 0.2ma. Max. At 240vac
- Meet iec-1000-3-2 class d
- Over power protection: 110~150% max
- Over voltage protection: +5v-5.6v~6.5v,+3.3v-3.6v~4.3v ,+12v-13.2v~15.0v
- Power good signal: on delay 100ms to 500ms,off delay 1ms
- Safety: to meet ul/csa/tuv standard
- Short circuit protection
- Temperature range: operating 0~50,storage -20~80
- Wattage: 435W
Specifications
- +12V1 VDC: Output Current Min:0.5 Output Current Max:32 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:0.5 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 VDC : Output Current Min:0.5 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0.1 Output Current Max:0.70 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120
- Input (PS): VOLTAGE: 90~264 VAC FULL RANGE FREQUENCY: 47~63HZ INPUT CURRENT:3A(RMS)FOR 230VAC 7A(RMS)FOR 115VAC INRUSH CURRENT:15A MAX. FOR 115 VAC PER MODULE 30A MAX. FOR 230 VAC PER MODULE PFC CAN REACH THE TARGET OF 95% @115/230VAC, FULL LOAD
Applications
- None Available
Aliases
- None Available