DMRW-6400F - Zippy Technologies DMRW-6400F DC Mini Redundant Power Supply. Form Factor:...
Request Quote
For Price
- Part Number:
- DMRW-6400F
- Model Number:
- DMRW-6400F
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DMRW-6400F DC Mini Redundant Power Supply. Form Factor: Direct Current Miniature Redundant (DC Mini Redundant) | Wattage: 400W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Ac inlet in each module
- Cooling : two 40 mm dc fans (module)
- Dielectric withstand: input / output 1500 vac for 1 second
- Dimensions (DxWxH): 7.28"/185mm x 5.91"/150mm x 3.39"/86mm
- Efficiency: 65% typical, at full load
- Emi noise filter: fcc class a, cispr22 class a
- Form Factor: Direct Current Miniature Redundant (DC Mini Redundant)
- Hold up time: 1.6 ms minimum at full load & nominal input voltage
- Humidity: operating: 20%-95%, non-operating: 10%-95%
- Input to frame ground 1500 vac for 1 second
- Input: DC -48V
- Over load protection: 130 ± 20%.
- Over voltage protection: +5v - 5.5v ~ 7.0v, + 3.3v - 4.0v ~ 4.5v
- Power good signal: on delay 100 ms to 500 ms, off delay 1 ms
- Remarks: 85% is normal condition and 95% is with special coating process
- Remote on / off control
- Safety: ul 1950, csa 22.2 no/ 950, tüv iec 950
- Short circuit:+5v,+12v,+3.3v
- Temperature range : operating 100C --- 400C
- The unit shall accept a logic open collector level which will disable / enable all the output voltage (exclude +5v standby), as logic level is low, outputs voltage were enable, as logic level is high,
- Wattage: 400W
Specifications
- +12V1 VDC: Output Current Min:2.5 Output Current Max:25 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:1.0 Output Current Max:25 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 VDC : Output Current Min:3.0 Output Current Max:32 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50
- -12 VDC: Output Current Min:0.1 Output Current Max:1.20 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:150
- -5 VDC: Output Current Min:0.1 Output Current Max:0.5 Output Current Peak:- Regulation Load:±6% Regulation Line:±1% Output Ripple & Noise Max:120
- Input (PS): VOLTAGE: DC -36V ~ -72V INPUT CURRENT: 12.0A (RMS). FOR -48 VDC INRUSH CRUUENT: 20A MAX.
Applications
- None Available
Aliases
- None Available