G1M4-5810P4V - Zippy Technology G1M4-5810P4V,N + 1 Redundant Form,810W, Input Type ...
Request Quote
For Price
- Part Number:
- G1M4-5810P4V
- Model Number:
- G1M4-5810P4V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technology G1M4-5810P4V,N + 1 Redundant Form,810W, Input Type Power Factor Correction (PFC), (DxWxH) 253/9.96 (mm/inch) x 83/3.27 (mm/inch) x 169/6.65 (mm/inch), Module G1M-5300P Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Ac inlet in each module
- Cooling: one 404028 mm dc fans (module)
- Dielectric withstanding: input/output 1500 vac for 1 minute
- Efficiency: 68% typical, at full load
- Emi: meet fcc class b, cispr 22, class b
- Faulty alarm methods: led, buzzer, ttl signal
- Hold up time: 16 ms minimum at full load & 90 vac input voltage
- Hot-swappable/hot pluggable redundancy function
- Input to fram ground 1500 vac for 1 minute
- Isolation: built-in the power module
- Meet iec-1000-3-2 class d (active pfc)
- Over current protection
- Over load protection: 110 ~ 160% max
- Over voltage protection: +5v - 5.9v ~ 6.7v, +3.3v - 3.9v ~ 4.7v, +12v - 13.5v ~ 15v
- Power good signal: on delay 100 ms to 500 ms, off delay 1 ms
- Remote on / off control.
- Remote signal design
- Safety: meet ul 60950, csa 60950, tuv en-60950
- Temperature range: operating 0C --- 40C, storage –20C --- 70C
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:22 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:100
- +3.3 VDC: Output Current Min:1 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:60
- +5 VDC : Output Current Min:1 Output Current Max:20 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:60
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:3.0 Output Current Peak:- Regulation Load:+5/-6% Regulation Line:±1% Output Ripple & Noise Max:60
- -12 VDC: Output Current Min:0 Output Current Max:0.80 Output Current Peak:- Regulation Load:+5/-10% Regulation Line:±1% Output Ripple & Noise Max:100
- Input (PS): VOLTAGE: 90 ~ 264 VAC FULL RANGE. FREQUENCY: 47 ~ 63 Hz. INPUT CURRENT: 3A (RMS) FOR 230 VAC 6A (RMS) FOR 115 VAC INRUSH CURRENT: 110A MAX. FOR 115 VAC PER MODULE 150A MAX. FOR 230 VAC PER MODULE
Applications
- None Available
Aliases
- None Available