M1G3-6930P - Zippy Technologies M1G3-6930P N + 1 Redundant Power Supply. Form...
Request Quote
For Price
- Part Number:
- M1G3-6930P
- Model Number:
- M1G3-6930P
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies M1G3-6930P N + 1 Redundant Power Supply. Form Factor: Component Plus One Independent Backup Redundant (N + 1 Redundant) | Wattage: 930W | Input: PFC Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 3.3v / 5v remote sensing
- Dielectric withstand: input / output 1500 vac for 1 second
- Dimensions (DxWxH): 13.19"/335mm x 14.53"/369mm x 1.65"/42mm
- Efficiency: 67% typical at 115vac full load
- Emi noise filter: fcc class a, cispr22 class a
- Form Factor: Component Plus One Independent Backup Redundant (N + 1 Redundant)
- Hold up time: 16 ms minimum at full load & normal input voltage
- Humidity:operating:20%-95%, non-operating:10%-95%
- Input to frame ground 1500 vac for 1 second
- Input: PFC
- Over current protection: 110% ~ 160%
- Over power protection: 110% ~ 170%
- Over voltage protection: +5v - 5.7v ~ 6.5v, 3.3v - 3.9v ~ 4.7v, +12v - 13.3v ~ 14.3v
- Power good signal: on delay 100 ms to 500 ms, off delay 1 ms
- Remarks:85% is normal condition and 95% is with special coating process
- Remote on / off control
- Safety: ul 1950, csa 22.2 no/ 950, tüv iec 950
- Short circuit protection: +5v, -5v, +12v, -12v, +3.3v, +5vsb
- Storage: -20C --- 80C
- Temperature range: operating: 0C --- 40C (90~240vac input)
- The unit shall accept a logic open collector level which will disable / enable all the output voltage (exclude +5v standby), as logic level is low, outputs voltage were enable, as logic level is high,
- Wattage: 930W
Specifications
- +12V1 VDC: Output Current Min:2.0 Output Current Max:30 Output Current Peak:- Regulation Load:±6% Regulation Line:±50mV Output Ripple & Noise Max:120mV
- +12V2 VDC: Output Current Min:2.0 Output Current Max:50 Output Current Peak:- Regulation Load:±6% Regulation Line:±50mV Output Ripple & Noise Max:70mV
- +3.3 VDC: Output Current Min:2.0 Output Current Max:44 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:70mV
- +5 VDC : Output Current Min:3.0 Output Current Max:44 Output Current Peak:- Regulation Load:±5% Regulation Line:±50mV Output Ripple & Noise Max:70mV
- +5 Vsb DC: Output Current Min:0.4 Output Current Max:3.5 Output Current Peak:- Regulation Load:+5%,-6% Regulation Line:±50mV Output Ripple & Noise Max:50mV
- -5 VDC: Output Current Min:0.2 Output Current Max:1.20 Output Current Peak:- Regulation Load:+5,-10% Regulation Line:±50mV Output Ripple & Noise Max:50mV
- Input (PS): VOLTAGE: 100V ~ 240VAC (WITH ± 10% TOLERANCE) FREQUENCY: 47Hz ~ 63Hz INPUT CURRENT: 16-8A MAX AT ANY LOW/HIGH INPUT VOLTAGE INRUSH CURRENT: 65/125A @ 115/230VAC (25?) POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD
Applications
- None Available
Aliases
- None Available