M1W4-6D50P - Zippy Technologies M1W4-6D50P N + 1 Redundant Power Supply. Form...
Request Quote
For Price
- Part Number:
- M1W4-6D50P
- Model Number:
- M1W4-6D50P
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies M1W4-6D50P N + 1 Redundant Power Supply. Form Factor: Component Plus One Independent Backup Redundant (N + 1 Redundant) | Wattage: 1350W | Input: PFC Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Dielectric Withstand: Input / Output 1500 Vac For 1 Second
- Dimensions (DxWxH): 13.39"/340mm x 16.61"/422mm x 1.69"/43mm
- Efficiency: 67% Typical At 115vac Full Load
- Emi Noise Filter: Fcc Class A, Cispr22 Class A
- Form Factor: Component Plus One Independent Backup Redundant (N + 1 Redundant)
- Hold Up Time: 16 Ms Minimum At Full Load & Normal Input Voltage
- Humidity: Operating: 20%-95%, Non-Operating: 10%-95%
- Input To Frame Ground 1500 Vac For 1 Second
- Input: PFC
- Over Current Protection: 110% ~ 180%
- Over Power Protection: 110% ~ 150%
- Over Voltage Protection: +5v ->5.7v ~ 6.5v, 3.3v -> 3.9v ~ 4.7v,+12v -> 13.3v ~ 14.3v
- Power Good Signal: On Delay 100 Ms To 500 Ms, Off Delay 1 Ms
- Remarks: 85% Is Normal Condition And 95% Is With Special Coating Process
- Safety: Ul&Cul, Tüv
- Short Circuit Protection: +5v, -5v, +12v, -12v, +3.3v
- Temperature Range: Operating: 0C ~ 40C; Storage: -20C ~ 80C
- Wattage: 1350W
Specifications
- Dimensions: 340.00x422.00x42.00 (mm), 13.39x16.61x1.65 (inch).
- Frequency: 47hz ~ 63hz
- Input Current: 20-10a Max At Any Low/High Input Voltage
- Inrush Current: 60/100a @ 115/230vac (25?)
- Output Voltage +12V: Output Current Min 6. Output Current Max 90. Regulation Load ±6%. Regulation Line ±50mV. Output Ripple and Noise Max 120mV.
- Output Voltage +3.3V: Output Current Min 3.5. Output Current Max 67.5. Regulation Load ±5%. Regulation Line ±50mV. Output Ripple and Noise Max 70mV.
- Output Voltage +5V: Output Current Min 6. Output Current Max 84.50. Regulation Load ±5%. Regulation Line ±50mV. Output Ripple and Noise Max 70mV.
- Output Voltage +5VSB: Output Current Min 0.4. Output Current Max 3.5. Regulation Load ±5/-6%. Regulation Line ±50mV. Output Ripple and Noise Max 70mV.
- Output Voltage -12V: Output Current Min 0.2. Output Current Max 1.2. Regulation Load ±5/-10%. Regulation Line ±50mV. Output Ripple and Noise Max 120mV.
- Output Voltage -5V: Output Current Min 0.2. Output Current Max 1.2. Regulation Load ±5/-10%. Regulation Line ±50mV. Output Ripple and Noise Max 120mV.
- Power Factor Correction: 95% @ 110v, Full Load
- Voltage: 100v ~ 240vac (With ± 10% Tolerance)
Applications
- None Available
Aliases
- None Available