M1Z2-6400P3V - Zippy Technology M1Z2-6400P3V,2U Redundant Form,400W, Input Type Power Factor...
Request Quote
For Price
- Part Number:
- M1Z2-6400P3V
- Model Number:
- M1Z2-6400P3V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technology M1Z2-6400P3V,2U Redundant Form,400W, Input Type Power Factor Correction (PFC), (DxWxH) 265/10.43 (mm/inch) x 101.2/3.98 (mm/inch) x 84/3.31 (mm/inch), Module M1Z-6400P3 Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Efficiency: 65% typical at 115vac, full load
- Emi noise filter: fcc class a, cispr22 class a
- Hold up time: 16 ms minimum at full load & normal input voltage
- Over current protection: the power supply shall latch off if the +5v,+12v&+3.3v output currents are over its limitation. The limited current is over 110~180% for each output current at each power modu
- Over power protection
- Over voltage protection: power module: +5v- 5.7v~6.5v, +3.3v- 3.9v~4.7v, +12v- 13.3v~14.3v; total Power: +5v-6.5v~8.5v, +3.3v- 4.7v~6.7v, +12v- 14.3v~17.3v
- Power good signal: on delay 100 ms to 500 ms, off delay 1 ms
- Safety: to meet ul, tuv, cb
- Short circuit protection
- Temperature range: operating 0C --- 40C, storage –20C --- 80C
- Warning method: audio alarm, ttl
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:26 Output Current Peak:- Regulation Load:±6% Regulation Line:±1% Output Ripple & Noise Max:120
- +3.3 VDC: Output Current Min:1 Output Current Max:24 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:70
- +5 VDC : Output Current Min:0.01 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:120
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:2 Output Current Peak:- Regulation Load:±5/-6% Regulation Line:±1% Output Ripple & Noise Max:70
- -12 VDC: Output Current Min:0.01 Output Current Max:1.00 Output Current Peak:- Regulation Load:±5/-10% Regulation Line:±1% Output Ripple & Noise Max:120
- -5 VDC: Output Current Min:0.01 Output Current Max:0.5 Output Current Peak:- Regulation Load:±10% Regulation Line:±1% Output Ripple & Noise Max:120
- Input (PS): Input:VOLTAGE: 90 ~ 264 VAC FULL RANGE. FREQUENCY: 47 ~ 63 Hz. INPUT CURRENT: 4A (RMS) FOR 230 VAC 8A (RMS) FOR 115 VAC INRUSH CURRENT: 60A MAX. FOR 115 VAC PER MODULE 100A MAX. FOR 230 VAC PER MODULE POWER FACTOR CORRECTION: PFC CAN REACH THE TARGET OF 95% AT 230V, FULL LOAD
Applications
- None Available
Aliases
- None Available