M1W1-5A10V3H - Zippy Technology M1W1-5A10V3H,EASYSWAP Form,1010W, Input Type Power Factor Correction...
- Part Number:
- M1W1-5A10V3H
- Model Number:
- M1W1-5A10V3H
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technology M1W1-5A10V3H,EASYSWAP Form,1010W, Input Type Power Factor Correction (PFC), (DxWxH) 320/11.27 (mm/inch) x 98.4/3.87 (mm/inch) x 40/1.57 (mm/inch), High Effenciency Series Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Efficiency: typical 84% at 115v, 86% at 230v, full load
- Hold up time: 16 ms minimum at full load & 90 vac input voltage
- Meet IEC-1000-3-2 class d
- Over current protection: the power supply shall latch off if the +12v output currents are over it’s limitation. The limited current is over 110~150% for each power module.
- Over power protection: 110~150%
- Over voltage protection: +3.3v?3.7~4.1v, +5v?5.7~6.5v, +12v?12.8~13.9v
- Power good signal: on delay 100 ms to 500 ms, off delay 1 ms
- Safety: meet ul, cul, tüv
- Short circuit protection: +5v, +3.3v, +12v output to dc return shall cause no damage and power supply latch, -12v short circuit to dc return shall cause no damage.
- Temperature range: operating 0? --- 50?, storage –20? --- 80?; operating temperature from 0? should start from ac 90v
Specifications
- Dimensions: 320.00x98.40x40.00 (mm), 12.60x3.87x1.57 (inch).
- Frequency: 47 ~ 63 hz
- High frequency: peak amplitudes lasting less than 200us(at 25degrees ambient cold start for each power unit)
- Input current: 15 / 7.5 a for 115 / 230 vac
- Inrush current: 15 / 30 amps @115/230vac.
- Output Voltage +12V: Output Current Min 2.0. Output Current Max 83. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 120mV.
- Output Voltage +3.3V: Output Current Min 1.0. Output Current Max 24. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 50mV.
- Output Voltage +5V: Output Current Min 1.0. Output Current Max 24.00. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 50mV.
- Output Voltage +5VSB: Output Current Min 0.1. Output Current Max 4. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 50mV.
- Output Voltage -12V: Output Current Min 0. Output Current Max 1.5. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 120mV.
- Voltage: 90~264 vac full range
Applications
- None Available
Aliases
- None Available
Related Items
RHD-6400P
Zippy Technology RHD-6400P,PS2*2 Redundant Form,400W, Input Type Power Factor
RHH-6400P
Zippy Technology RHH-6400P,PS2*2 Redundant Form,400W, Input Type Power Factor
RHI-6400P
Zippy Technology RHI-6400P Power Supply | PS2*2 Redundant Form |
RHI-6460P
Zippy Technologies RHI-6460P Redundant Power Supply | Input Power 100-240VAC