SPH2-5A00V4H - Zippy SPH2-5A00V4H N + 1 Redundant Power Supply. Form Factor:...
Request Quote
For Price
- Part Number:
- SPH2-5A00V4H
- Model Number:
- SPH2-5A00V4H
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy SPH2-5A00V4H N + 1 Redundant Power Supply. Form Factor: Component Plus One Independent Backup Redundant (N + 1 Redundant) | Wattage: 1000W | Input: PFC Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Balance load sharing design
- Dielectric withstand: input/output 1500 vac for 1 minute input to frame ground 1500 vac for 1 minute
- Dimensions (DxWxH): 404mm/15.91" x 127mm/5" x 49mm/1.93"
- Efficiency(per set): power supply efficiency typical 84% at115v, 12v/54a 5vsb/0.4a
- Emi noise filter: fcc class a , cispr 22 class a
- Faulty alarm methods: led, buzzer, ttl signal
- Form Factor: Component Plus One Independent Backup Redundant (N + 1 Redundant)
- Hold up time: 11ms min.
- Hot-swappable/hot pluggable redundancy function
- Input: PFC
- Isolation: built-in the power module
- Meet iec-1000-3-2 class d (active pfc)
- Over voltage protection: +3.3v-3.7v~4.1v, +5v-5.7v~6.5v, +12v-12.8 v~13.9v
- Power good signal: on delay 100ms to 500ms
- Power supply efficiency typical 86% at230v, 12v/54a 5vsb/0.4a
- Remote on / off control
- Remote sensing design
- Safety: meet ul6950,csa22.2no/60950,tuv iec60950
- Temperature range: operating 0C~50C
- Wattage: 1000W
Specifications
- Dimensions: 404.00x127.00x49.00 (mm), 15.91x5.00x1.93 (inch).
- Frequency: 47~63hz
- Input current (per power module): 12/6a for 115/230vac
- Inrush current (per power module): 15/30a max. For 115/230vac (25C)
- Output Voltage +12V: Output Current Min 1.0. Output Current Max 54. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 120mV.
- Output Voltage +3.3V: Output Current Min 1.0. Output Current Max 22. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 50mV.
- Output Voltage +5V: Output Current Min 1.0. Output Current Max 22.00. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 50mV.
- Output Voltage +5VSB: Output Current Min 0.1. Output Current Max 3. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 50mV.
- Output Voltage -12V: Output Current Min 0. Output Current Max 0.5. Regulation Load ±5%. Regulation Line ±1%. Output Ripple and Noise Max 120mV.
- Voltage: 90~264vac full range
Applications
- None Available
Aliases
- None Available