DM1W-2810V - Zippy DM1W-2810V Power Supply

DM1W-2810V - Zippy DM1W-2810V Power Supply - Redundant Module 810W Simple Type:...

Zippy DM1W-2810V Power Supply - Redundant Module 810W Simple Type: Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

As logic level is low, outputs voltage were enable, as logic level is high, outputs voltage were disable.
Cooling: two 38mm dc fans
Dielectric withstand: input/output 1800 vac for 1 second input to frame ground 1800 vac for 1 second
Efficiency: 86%, at 48vdcin ,full load
Emi noise filter: cispr22 class a
Hold up time: 1 ms minimum at full load & nominal input voltage
Over power protection: 110~150% max
Over voltage protection: +12v-13.2v~15v
Power good signal: on delay 100ms to 550ms
Remote on/off control
Safety: to meet ul, cul, tuv
Short circuit protection: +12v
Temperature range: operating 0C~50C
The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by).

General

Dimensions: 265.30x98.40x40.00 (mm), 10.44x3.87x1.57 (inch).
Frequency: dc
Input current: 30a (rms) for 36vdc
Inrush current: 30a max.
Output Voltage +12V: Output Current Min 2. Output Current Max 66. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 120mV.
Output Voltage +5VSB: Output Current Min 0.1. Output Current Max 4. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
Voltage: 36~72vdc