DM1W-5600V - Zippy Technologies DM1W-5600V DC N + 1 Power Supply. Form...
Request Quote
For Price
- Part Number:
- DM1W-5600V
- Model Number:
- DM1W-5600V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DM1W-5600V DC N + 1 Power Supply. Form Factor: Direct Current Component Plus One (DC N + 1) | Wattage: 600W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- As logic level is low, outputs voltage were enable, as logic level is high, outputs voltage were disable.
- Cooling: two 38mm dc fans
- Dielectric withstand: input/output 1800 vac for 1 second input to frame ground 1800 vac for 1 second
- Dimensions (DxWxH): 10.44"/265.3mm x 3.87"/98.4mm x 1.57"/40mm
- Efficiency: typical 80% at -48v ,full load
- Emi noise filter: cispr22 class a
- Form Factor: Direct Current Component Plus One (DC N + 1)
- Hold up time: dc output 5v must be maintain 1 msec in -48v
- Input: DC -48V
- Over current protection: +5v, +12v, +3.3v: 110~150%
- Over power protection: 110~150% max
- Over voltage protection: +12v-12.9~14.2v, +5v-5.8~6.8v, +3.3v-3.7~4.5v
- Power good signal: on delay 100ms to 550ms
- Remote on/off control
- Safety: to meet ul, cul, tuv
- Short circuit protection: +12v, +5v, +3.3v, -12v
- Temperature range: operating 0C~50C, storage -20C~80C
- The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by).
- Wattage: 600W
Specifications
- +12V1 VDC: Output Current Min:2 Output Current Max:45 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120mV
- +3.3 VDC: Output Current Min:0.5 Output Current Max:36 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50mV
- +5 VDC : Output Current Min:0.5 Output Current Max:32 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:500mV
- +5 Vsb DC: Output Current Min:0.1 Output Current Max:4 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:50mV
- -12 VDC: Output Current Min:0 Output Current Max:0.80 Output Current Peak:- Regulation Load:±5% Regulation Line:±1% Output Ripple & Noise Max:120mV
- Input (PS): VOLTAGE: -36~-72VDC, NORMAL -48VDC STEADY-STATE CURRENT: 16AMP AT -48VDC INRUSH CURRENT:30A AT -48VDC (AT 25 DEGREES AMBIEND COLD START)
Applications
- None Available
Aliases
- None Available