DM1W-5650V - Zippy Technologies DM1W-5650V DC N + 1 Power Supply. Form...
- Part Number:
- DM1W-5650V
- Model Number:
- DM1W-5650V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies DM1W-5650V DC N + 1 Power Supply. Form Factor: Direct Current Component Plus One (DC N + 1) | Wattage: 650W | Input: DC -48V Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- As logic level is low, outputs voltage were enable, as logic level is high, outputs voltage were disable.
- Cooling: two 38mm dc fans
- Dielectric withstand: input/output 1800 vac for 1 second input to frame ground 1800 vac for 1 second
- Dimensions (DxWxH): 10.44"/265.3mm x 3.87"/98.4mm x 1.57"/40mm
- Efficiency: typical 80% at -48v ,full load
- Emi noise filter: cispr22 class a
- Form Factor: Direct Current Component Plus One (DC N + 1)
- Hold up time: dc output 5v must be maintain 1 msec in -48v
- Input: DC -48V
- Over current protection: +5v, +12v, +3.3v: 110~150%
- Over power protection: 110~150% max
- Over voltage protection: +12v-12.9~14.2v, +5v-5.8~6.8v, +3.3v-3.7~4.5v
- Power good signal: on delay 100ms to 550ms
- Remote on/off control
- Safety: to meet ul, cul, tuv
- Short circuit protection: +12v, +5v, +3.3v, -12v
- Temperature range: operating 0C~50C, storage -20C~80C
- The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by).
- Wattage: 650W
Specifications
- Dimensions: 265.30x98.44x40.00 (mm), 10.44x3.87x1.57 (inch).
- Inrush Current: 30a At -48vdc (At 25 Degrees Ambient Cold Start)
- Output Voltage +12V: Output Current Min 2. Output Current Max 50. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 120mV.
- Output Voltage +3.3V: Output Current Min 0.5. Output Current Max 36. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
- Output Voltage +5V: Output Current Min 0.5. Output Current Max 32.00. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
- Output Voltage +5VSB: Output Current Min 0.1. Output Current Max 3.5. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
- Output Voltage -12V: Output Current Min 0. Output Current Max 0.8. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 120mV.
- Steady-State Current: 17 Amp At -48vdc
- Voltage: -36~-72vdc, Normal -48vdc
Applications
- None Available
Aliases
- None Available
Related Items
MIN-6250P
Zippy Technology MIN-6250P Power Supply. 250W Module | 90V ~
MPN1-6300F
Zippy Technology MPN1-6300F 300W Power Supply Module
AIN-3350P
Zippy AIN-3350P Power Supply - Redundant Module 350W
AIN-3400P
Zippy AIN-3400P Power Supply - Redundant Module 400W