M1W-2A10V - Zippy Technologies M1W-2A10V AC N + 1 Power Supply. Form...
Request Quote
For Price
- Part Number:
- M1W-2A10V
- Model Number:
- M1W-2A10V
- Make:
- ZIPPY TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Zippy Technologies M1W-2A10V AC N + 1 Power Supply. Form Factor: Alternating Current Component Plus One (AC N + 1) | Wattage: 1010W | Input: PFC Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Cooling: two 38mm dc fans
- Dielectric withstand: input/output 1800 vac for 1 second input to frame ground 1800 vac for 1 second
- Dimensions (DxWxH): 10.44"/265.3mm x 3.87"/98.4mm x 1.57"/40mm
- Efficiency: 84% typical, at 115vac full load, 87% typical, at 230vac full load
- Form Factor: Alternating Current Component Plus One (AC N + 1)
- Hold up time: 16ms minimum at full load & nominal input voltage
- Input: PFC
- Over voltage protection: +12v-13.2v~15v
- Power good signal: on delay 100ms to 500ms, off delay 1ms overload protection: 110-150% max
- Remote on/off control
- Safety: to meet ul, cul, tuv
- Short circuit protection: +12v
- Temperature range: operating 0C-50C, storage -20C-80C
- The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by). As logic level is low, outputs voltage were enable, as logic level
- Wattage: 1010W
Specifications
- Dimensions: 265.30x98.40x40.00 (mm), 10.44x3.87x1.57 (inch).
- Frequency: 47-63hz
- Input current: 15a (rms) for 115 vac 7.5a (rms) for 230 vac
- Inrush current: 15a max. For 115 vac 30a max. For 230 vac
- Output Voltage +12V: Output Current Min 2. Output Current Max 83. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 120mV.
- Output Voltage +5VSB: Output Current Min 0.1. Output Current Max 4. Regulation Load ±5%, Regulation Line ±1%, Output Ripple & Noise Max 50mV.
- Voltage: 90-264vac full range
Applications
- None Available
Aliases
- None Available